Under F3, the freezer defrost ended only because its fifty-minute limit was reached, not because the coil warmed up to the point that normally stops the cycle. Put plainly, the defrost used its full allowance and…
Under F3, the freezer defrost ended only because its fifty-minute limit was reached, not because the coil warmed up to the point that normally stops the cycle. Put plainly, the defrost used its full allowance and ice remained. For diagnosis the manual calls for a resistance reading on the freezer defrost heater, a part built right into the evaporator assembly.
1. Inspect the freezer's rear wall. 2. A solid sheet of frost, as opposed to a light coating, is the sign to watch for. 3. Take out anything that blocks the return air path, and never use heat to melt the frost. 4. Jot down how long it has been building and call us.
That is the longest the control allows. If the coil has not reached the end temperature by then, the cycle ends anyway and F3 is set.
You can unplug it and let it thaw out, but that only clears the frost, not the cause. The heater circuit still has to be tested.
We diagnose first, give you a written price, and you approve it before work. The repair has a 30-day workmanship warranty. Parts and labor are listed in that quote.
A technician diagnoses it on site and gives you the price in writing before any work starts.