Bosch Oven E314 When the Cancel or Off Key Reads Stuck

What E314 means

Every oven needs a dependable way to stop, and the Cancel or Off key is that way. E314 signals a problem with that one key. Because losing it matters more than losing any other, the control stops the oven completely, and it will not recover merely because the key lets go. Bosch states it clears only through a system reset. Technicians are told to inspect two things, the keypad itself and the circuit board behind it.

Common causes of E314

The Off key registering as held down all the time
Damp or greasy residue across that corner of the glass
A failing user interface board underneath the keypad

✓ One safe check you can try

1. Clean the control panel with a lightly damp cloth and dry it thoroughly. 2. Turn the breaker off for two minutes and restore power. 3. If E314 returns with nothing touching the panel, the key itself or the board behind it has failed and was not just dirty.

! Why to stop there

Soaking the panel risks liquid reaching the circuits behind the glass.
A stuck Off key and a bad interface board act the same, so replacing the board first can be wasted money.
Prying at the glass to get at the pad can crack it.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Oven codes

E223Lower Probe Reads Colder Than Allowed (Bosch Oven E223) E226Bosch Oven E226 After the Lower Door Latch Signal Is Lost E309Control Module Failed Its Program Memory Check: Bosch Oven E309 E310Bosch Oven E310 Signals a Settings Memory Failure on the Control Module E312The Control Board's Own Heat Sensor Died (Bosch Oven E312) E414Off Key Failure Logged Behind the Scenes, Bosch Oven E414 E201Bosch Oven E201 on a Double Wall Model, Lower Cavity Sensor Reads Open E204Lower Sensor Wire Touching Metal: Bosch Oven E204 on Double Ovens

E314E314 questions

Why does losing the Off key stop the whole oven?

Because that key is the way to shut the oven down in an emergency. If the control cannot trust it, stopping everything is the safest response.

Could grease really trigger it?

Yes. A film of grease or moisture over the key can read as a constant press. Cleaning is the first and cheapest step before any parts are considered.

What if cleaning does not help?

Then the pad assembly or the interface board is likely at issue. We diagnose, give a written price first, and back our work with a 30-day workmanship warranty.