Off Key Failure Logged Behind the Scenes, Bosch Oven E414

What E414 means

E414 shares a service entry with the Cancel and Off key problem, and it is the version you meet when the failure is noted inside the oven and not shown at the glass. The result is identical: the oven stops operating, and only a system reset gets rid of the message. The checks on record cover the keypad itself and the interface board that drives it.

Common causes of E414

Off or Cancel pad pressed, or wrongly seen as pressed
Keypad with a worn-out pad at that spot
Interface board sending the wrong key status

✓ One safe check you can try

1. Think about whether anything has been resting against the control panel, such as a dish towel or a chopping board leaned on the fascia; a weight like that can hold the pad pressed and set this off. 2. Remove it and clean the glass. 3. Shut off the breaker for two minutes, then restore power.

! Why to stop there

Taking the fascia off for a look puts you near live wiring.
The same code can come from a worn pad or a bad board, and only testing tells them apart.
Constant resets do not repair a failing key.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Oven codes

E223Lower Probe Reads Colder Than Allowed (Bosch Oven E223) E226Bosch Oven E226 After the Lower Door Latch Signal Is Lost E204Lower Sensor Wire Touching Metal: Bosch Oven E204 on Double Ovens E206Lower Oven Door Would Not Lock (Bosch Oven E206) E207Bosch Oven E207 and a Lower Cavity Door That Refuses to Unlock E215Lower Cavity Overheated and Locked Itself: Bosch Oven E215 E216Lower Cavity Meat Probe Socket Problem on a Bosch Oven, E216 E222Bosch Oven E222 Where the Lower Probe Reads Hotter Than Allowed

E414E414 questions

How does E414 differ from E314?

They share a service entry. E314 is raised at the panel, while E414 is logged internally. The effect on the oven and the checks we run are the same for both.

Can something leaning on the oven cause this?

It can. A cloth or board pressing on the glass can register as a held key. Clear the area and reset before assuming a part has failed.

Do I need a new keypad?

Only if cleaning and a reset do not help. In that case we test the pad and the board, and quote a written price before replacing anything, so you decide first.