Bosch Range E122? Check the Meat Probe First

What E122 means

Halfway through a roast the oven cuts out and E122 appears. The probe in the meat socket is reporting a temperature above what the oven will tolerate, so heating stays off until it is removed. Bosch's first suggestion is a simple question: was it plugged in but left lying loose in the oven? Sitting in open air, a probe heats up quickly and, in a sense, correctly reports a number beyond its range.

Common causes of E122

Probe plugged in but not placed in food
Probe sensing element that has broken and reads high
Dirty jack or damaged cable

✓ One safe check you can try

1. Wearing an oven mitt, pull the probe's plug from its socket. 2. Lift the probe out of the cavity. 3. Restart your bake without it. 4. If the oven now heats, the probe or its use was the cause. If E122 comes back with no probe inside, call us.

! Why to stop there

Reaching into a hot oven for a stuck plug risks a burn.
Tugging on the cable can tear a probe that was fine.
Replacing oven electronics for a probe problem is an expensive wrong guess.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F91Bosch Range F91 Means the Unlock Attempts Ran Out F92Bosch Range F92: Oven Believes the Door Is Open F93Bosch Range F93 Is the Lock-Side Twin of F90 F94Bosch Range F94: Door Lock Attempts Exhausted E107Bosch Range E107: When the Oven Door Stays Locked E115Bosch Range E115 - Oven Overheated, Door Locked Itself E126Bosch Range E126 and the Latch Switch That Went Silent E201Bosch Range E201 Is About the Warming Drawer

E122E122 questions

Why did the roast stop cooking?

Heating pauses until the probe is removed. A roast that stalled this way usually just needs the probe out and the cycle restarted, perhaps with the probe actually in the meat next time.

Is a replacement probe the answer?

Not necessarily. First ask whether the probe lay loose on a rack while plugged in; that alone produces exactly the reading this code reports, and costs nothing to correct.

Could a dirty socket be the cause?

Yes. Grease in the socket can give false readings, so with the oven cold, a gentle wipe is a reasonable step before buying anything. Never wipe the socket while the oven is warm.