Booking today · Houston · three-hour arrival windows Independent Bosch specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 568-9298 Schedule a Visit
Error code · Oven

Bosch Oven E116: Meat Probe Socket in the Upper Oven Shorts

On ovens like the HBLP451UC, HBLP651UC, HBL8451UC, HBL8651UC and HBN8451UC, E116 flags a meat probe error in cavity 1: the hot wire is shorted to ground, or the probe connection keeps toggling between connected and disconnected.…

Low risk · DIY check OK
Code
E116
Appliance
Oven
Brand
Bosch
Warranty
30-day workmanship

What E116 means

On ovens like the HBLP451UC, HBLP651UC, HBL8451UC, HBL8651UC and HBN8451UC, E116 flags a meat probe error in cavity 1: the hot wire is shorted to ground, or the probe connection keeps toggling between connected and disconnected. The probe is disabled, but the oven keeps running for ordinary baking. The code is cleared by a control reset. The rest of the oven behaves as usual.

Common causes of E116

  • Probe plug or cable shorting to ground
  • Probe connection toggling on and off
  • Damaged or dirty probe socket
  • Probe needing replacement
✓ One safe check you can try

1. Unplug the meat probe and set it aside. 2. Turn the breaker off for five minutes, then restore it, which clears the code. 3. Bake normally without the probe. 4. Try a different, undamaged probe only if you have one made for your model. If E116 returns with no probe in place, call us.

! Why to stop there
  • The probe socket sits in the cavity wall near the heating parts.
  • A damaged probe lead can cause the error and is a cheaper fix than a socket.
  • Without the probe the oven bakes normally, so this is rarely an emergency.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

Technical reference

Code
E116
Appliance
Bosch oven
Checked
October 2026

We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.

E116E116 questions
Can I still bake without the probe?

Yes. Bosch notes the oven continues, only the probe function is disabled. Use normal timed baking until the cause is sorted. Check the probe lead for kinks or burn marks.

How do I clear E116?

A control reset, meaning breaker off for five minutes, clears it. If the same probe is plugged in and still shorts, the code returns. Skip the probe for now and bake by time instead.

Is the probe or the oven causing it?

Either may need attention. We test the probe and the socket, give a written price before work, and offer a 30-day workmanship warranty. An undamaged probe is the easiest test.

Book a visit

Still unsure about E116?

A technician diagnoses it on site and gives you the price in writing before any work starts.

☎ Call our office ▤ Schedule a Visit