Bosch Oven E201: On a Double Oven the Lower Sensor Reads Open
This code applies to double wall ovens such as the HBLP651UC, HBL8651UC, HBL8661UC and HBL8752UC, where E2xx numbers point to the lower cavity. E201 means the cavity 2 temperature sensor is open, the same condition E101…
- Code
- E201
- Appliance
- Oven
- Brand
- Bosch
- Warranty
- 30-day workmanship
What E201 means
This code applies to double wall ovens such as the HBLP651UC, HBL8651UC, HBL8661UC and HBL8752UC, where E2xx numbers point to the lower cavity. E201 means the cavity 2 temperature sensor is open, the same condition E101 reports for the upper oven. Heating in the lower oven stops while the fan runs fast. On slide-in ranges the E2xx family means something else, the warming drawer.
Common causes of E201
- Open circuit in the cavity 2 sensor
- Loose or damaged sensor connection in the lower oven
- Sensor needing replacement
1. Let the lower oven cool completely. 2. Switch the oven breaker off for five minutes, then back on. 3. Try the upper oven on its own to confirm it still behaves normally. 4. If E201 returns on the lower cavity, stop using it. Do not reach into the rear wall of the cavity.
- The lower sensor is mounted inside a hot cavity, close to live elements.
- A reading that drops out could come from wiring as well as the sensor itself.
- The upper oven may still work, so a wrong guess about which half is at issue is easy.
Technical reference
- Code
- E201
- Appliance
- Bosch oven
- Maker documentation
- Bosch owner manuals and support
- Checked
- October 2026
We read the code from the maker’s documentation and our own service work, and we do not reproduce the maker’s document. Always confirm the full model number before acting on a code. We are an independent repair company, not affiliated with Bosch.
Other Oven codes
Does E201 stop the upper oven too?
It concerns the lower cavity. The upper oven may keep working, but the shared control can limit what is allowed, so test it carefully. Mention which cavity was in use when it appeared.
Does E201 mean what E101 means?
They are the same condition on different cavities. E101 is the upper or single oven, and E201 is the lower oven of a double. The sensor feeds only the lower cavity's control.
How do you handle it?
We test the lower sensor circuit, give a written price before any repair, and back our work with a 30-day workmanship warranty. Both cavities are tested before we leave.
Still seeing E201?
A technician diagnoses it on site and gives you the price in writing before any work starts.