Bosch Oven E010 Means Stored Settings Failed Their Check

What E010 means

Where E009 concerns the operating program, E010 concerns the data memory: the saved settings and calibration. The oven's routine check of that memory failed, or a write to it did not finish, so the oven turns off every heating element. As with E009, the manual notes the error cancels at start-up if the next check passes, so it does not always mean a lasting failure.

Common causes of E010

Settings memory on the user interface corrupted
A write to memory cut short by a power interruption
A failing memory chip on the interface board

✓ One safe check you can try

1. Turn the breaker off for two minutes and then restore it. 2. Look at the clock, your temperature offset and any saved preferences. 3. If they have reverted to factory defaults, the memory really did lose its contents, and that detail helps us. 4. If E010 still shows, stop using the oven.

! Why to stop there

The board that stores these settings sits behind the control panel near live parts.
Resetting repeatedly will not repair damaged memory.
The same code can mean a one-time glitch or a failing chip, and only a test tells them apart.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Oven codes

E223Lower Probe Reads Colder Than Allowed (Bosch Oven E223) E226Bosch Oven E226 After the Lower Door Latch Signal Is Lost E201Bosch Oven E201 on a Double Wall Model, Lower Cavity Sensor Reads Open E204Lower Sensor Wire Touching Metal: Bosch Oven E204 on Double Ovens E206Lower Oven Door Would Not Lock (Bosch Oven E206) E207Bosch Oven E207 and a Lower Cavity Door That Refuses to Unlock E215Lower Cavity Overheated and Locked Itself: Bosch Oven E215 E216Lower Cavity Meat Probe Socket Problem on a Bosch Oven, E216

E010E010 questions

Why did my clock reset?

When the settings memory loses data, the oven falls back to defaults, which includes the clock. It is a helpful clue that the memory itself was affected.

Is E010 worse than E009?

Both disable heating. E009 involves the program and E010 the stored data. In practice the repair path is similar, and we confirm which applies during the visit.

Will I lose my saved settings after repair?

Possibly, since a replacement board starts with defaults. We reset the oven's configuration, and you can re-enter your preferences. A written price comes first, with a 30-day workmanship warranty afterward.