Program Memory Check Failed and No Heat: Bosch Oven E009

What E009 means

Each time the oven restarts it checks its own program memory before it lets anything heat. E009 is the user interface board reporting that this check failed. The manual states the result: every heating element is disabled. It also says the error cancels itself when the next start-up check passes, which explains why an oven sometimes wakes up after a power cut and appears perfectly normal.

Common causes of E009

Program memory on the user interface board corrupted
A surge or interruption that hit while the board was writing to memory
User interface board wearing out

✓ One safe check you can try

1. Switch the oven's breaker off for two minutes, then on again, which forces the start-up memory check to run once more. 2. Bosch documents that the error cancels if that check succeeds, so a single appearance after a storm or outage deserves one reset before you assume a failure. 3. If E009 returns, leave the oven off.

! Why to stop there

The interface board sits behind the panel next to live wiring.
A one-time memory glitch and a failing board look identical until the reset has been tried.
Ordering a board before the reset test risks paying for a part you did not need.
If the board is failing, repeated restarts will not fix it and only delay the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Oven codes

E223Lower Probe Reads Colder Than Allowed (Bosch Oven E223) E226Bosch Oven E226 After the Lower Door Latch Signal Is Lost E309Control Module Failed Its Program Memory Check: Bosch Oven E309 E310Bosch Oven E310 Signals a Settings Memory Failure on the Control Module E312The Control Board's Own Heat Sensor Died (Bosch Oven E312) E314Bosch Oven E314 When the Cancel or Off Key Reads Stuck E414Off Key Failure Logged Behind the Scenes, Bosch Oven E414 E201Bosch Oven E201 on a Double Wall Model, Lower Cavity Sensor Reads Open

E009E009 questions

Can a power outage really cause E009?

Yes. A brief outage or surge during a memory write can corrupt stored data. Houston storm season makes this more likely, so a single appearance after one is often just a reset away from clearing.

Is my oven ruined if the code stays?

Not necessarily. The fix is usually replacing the user interface board, which is a defined repair. We confirm first and give you a written price before ordering anything.

Can I still use the broiler in the meantime?

No. The code disables every heating element in the oven, so baking and broiling both stop. We suggest leaving the oven off until it is checked, and we can tell you what the repair will cost in writing first.